For concrete alleys or rubber flooring! The IntelliCable® Alley Scraper system automatically clean on a precise schedule, even while you sleep!
https://patzcorp.com/intellicable-alley-scrapers-brochure-pa-26731-spec-page-pro-iii/
|
Motor |
Cable Options |
Maximum Scraped Alley Length (SAL) |
Maximum Total Circuit Length (TCL) |
View Full Specs |
IntelliCable® Pro II |
¾ horsepower electric motor |
|
½" cable: 215 feet (66 m) ⁷⁄₁₆" cable: 250 feet (76 m) ³⁄₈" cable: 280 feet (85 m) |
½" cable: 850 feet (259 m) ⁷⁄₁₆" cable: 1000 feet (305 m) ³⁄₈" cable: 1100 feet (335 m) |
https://patzcorp.com/wp-content/uploads/2021/08/IntelliCable%C2%AE-Alley-Scrapers-Brochure-PA-26731-Spec-Page-Pro-II.pdf |
IntelliCable® Pro III |
¾ horsepower electric motor |
½" cable: 440 feet (134 m) ⁷⁄₁₆" cable: 510 feet (155 m) ³⁄₈" cable: 570 feet (174 m) |
½" cable: 1760 feet (536 m) ⁷⁄₁₆" cable: 2040 feet (622 m) ³⁄₈" cable: 2280 feet (695 m) |
https://patzcorp.com/wp-content/uploads/2021/08/IntelliCable%C2%AE-Alley-Scrapers-Brochure-PA-26731-Spec-Page-Pro-III.pdf |
Sensor Control
Drive unit design includes sensor disc and proximity sensors to provide the control panel with necessary information to keep track of scraper's position and direction.
SENTINEL CONTROL PANEL
Advanced learning system continuously adjusting to weather, bedding, and manure changes by recalculating the amount of energy required to clean on every cycle.
Patz innovative Auto-Tensioning option
Superior sensitivity - programmable BUMP feature.
Advanced “Patz Remote Notification” emails and/or text messages operator(s) with scraper status and service updates. Transmits updates following corrective service.
Faults are stored in memory up to 4 weeks—even if power is cycled.
Allowing service technicians to quickly troubleshoot.
Choice of Cable
For Pro II or Pro III Units:
Self-Locking Ratchet System
The self-locking ratchet system allows easy tightening of cable.
Patz Proven Performer Corner Wheel
16” (406 mm) diameter cast iron corner wheels feature stainless steel fasteners as standard components. Corner wheels accept 3/8”, 7/16” or 1/2” cable. Phenolic with graphite sleeve bearings for longer life.
Folding Angled Tip-Up Scraper
Wings pivot to follow wall tightly for better cleaning; blades tip up and the wings pivot inward on reverse movement. Suitable for alleys with widths from 84 to 192 inches (2.1-4.9 m).
Versa Folding V Scraper
This versatile, low-profile scraper is available in 6, 8, 10, 12, and 14 foot sizes to clean alleys with widths from 64 to 174 inches. Choose from three economical, replaceable blade edges: AR400 steel, rubber, or urethane.
Choice of Sleds
Standard or short sleds available. Standard 57" (1,448 mm) sleds provide better scraper stability, while 37" (940 mm) sleds are available where a shorter sled is required.
For Rubber Flooring
Hard nylon rollers located on sled ends and scraper arms position the scraper above the rubber covered alleys, ensuring only rubber blades touch rubber flooring.
As an essential business supporting food and agriculture, Patz Corporation is taking every precaution to ensure the health and safety of our employees, dealers, customers and communities.