Patz 616 Vertical Electric Prop Agitator

High-performance vertical prop agitator provides a consistent blend and keeps solids suspended for pumping!

Easy-to-install anchored pivot allows precise positioning to agitate entire pit
Choice of agitation volumes
Unique seal system extends gearbox and bearing life!
Abrasion-resisting steel propeller blades & shear plate with stainless steel hardware below the liquid line for long life!
Easy lube – convenient ‘above pit’ oil and grease lines
Agitator available in various lengths 6 to 16 feet (1.8 to 4.8 m).
Energy Efficient—low horsepower requirements

Specifications

	Agitator Lengths	Agitating Capacity	Horsepower	View Full Specs
616	6-16 feet (1.8-4.8 meters)	Up to 9,000 gallons per minute	7.5, 10, or 15 horsepower motor

Standard Features and Options

Bearing protection
Protection against bearing contamination. The lower gearbox output shaft has four seals to keep contaminants out.

Adjustable shear plate
Adjustable shear plate located close to the propeller chops and homogenizes material for a more uniform consistent blend.

Anchored pivot
An anchored pivot is included as standard equipment to allow you to precisely position the agitator to agitate the entire pit. Plate must be lagged to a concrete pad or curb.

Foot locking pedal
Foot locking pedal allows rotation of the agitator to handle many types of slurry waste and improve pit cleanout.

Oil reservoir
Easy access to oil reservoir. End guessing - inspect oil level conveniently. A large fill hole allows easy access for adding oil to the gearbox. (Patz recommends using a non-detergent oil.)

Agitation volumes
Choice of agitation volumes. Patz offers a choice of electric motors (7-1/2, 10 or 15 HP) and pulleys to match your agitation requirements.

Unique seal system
Unique seal system extends gearbox bearing life. Gearbox bearing seals can be purged every 8 hours.

Terms & Conditions

bottled water redirect

Progressive Dairyman – Canada Redirect

Download Spec Sheet

Company

Products

Resources

News

Contact